What tools do you need to install traditional wallpaper?
Before you start installing traditional wallpaper, make sure you have the following tools:
- Wallpaper adhesive
- Wallpaper brush
- Measuring tape
- Utility knife
- Smoothing brush
- Drop cloth or plastic sheeting
Step-by-step guide to install traditional wallpaper
Follow these steps to install traditional wallpaper:
Step 1: Prepare the wall
Start by preparing the wall where you want to install the wallpaper. Remove any old wallpaper or loose paint. Clean the wall thoroughly and make sure it is smooth and dry.
Step 2: Measure and cut the wallpaper
Measure the height of the wall and add a few extra inches to allow for trimming. Cut the wallpaper into strips of the desired length, making sure to match the pattern if applicable.
Step 3: Apply the wallpaper adhesive
Apply wallpaper adhesive to the back of the first strip of wallpaper using a wallpaper brush. Make sure to spread the adhesive evenly and cover the entire surface.
Step 4: Hang the wallpaper
Carefully hang the first strip of wallpaper on the wall, starting from the top. Use a smoothing brush to remove any air bubbles and ensure a smooth application. Repeat this process for the remaining strips, making sure to match the patterns as you go.
Step 5: Trim the excess wallpaper
Once all the strips are hung, use a utility knife to trim the excess wallpaper at the top and bottom. Be careful not to cut into the wall.
Step 6: Clean and finish
Use a damp sponge to clean any excess adhesive from the wallpaper. Allow the wallpaper to dry completely before moving any furniture back into place.
Installing traditional wallpaper can be a fun and rewarding DIY project. With the right tools and a step-by-step guide, you can transform any room with beautiful wallpaper. Remember to take your time and follow the instructions carefully for the best results.